Model Type | Gövde Ölçüleri - Overall Dimensions (mm) A | Gövde Ölçüleri - Overall Dimensions (mm) B | Gövde Ölçüleri - Overall Dimensions (mm) C | Gövde Ölçüleri - Overall Dimensions (mm) D | Gövde Ölçüleri - Overall Dimensions (mm) E | Gövde Ölçüleri - Overall Dimensions (mm) F | Gövde Ölçüleri - Overall Dimensions (mm) G | Gövde Ölçüleri - Overall Dimensions (mm) H | Tork Min. Nm - Torque Min. Nm 5° | Tork Min. Nm - Torque Min. Nm 10° | Tork Min. Nm - Torque Min. Nm 15° | Tork Min. Nm - Torque Min. Nm 20° | Tork Min. Nm - Torque Min. Nm 25° | Tork Min. Nm - Torque Min. Nm 30° | Ağırlık Weight (Kg) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
PO-P 25x40 | 25 | 40 | 91 | 47 | -- | 44 | 19 | 45 | 4,8 | 11,0 | 18,0 | 27,6 | 40,5 | 58,4 | 0,40 |
PO-P 25x60 | 25 | 60 | 91 | 47 | -- | 44 | 19 | 65 | 7,1 | 16,2 | 26,6 | 40,8 | 59,9 | 86,4 | 0,59 |
PO-P 25x80 | 25 | 80 | 91 | 47 | -- | 44 | 19 | 85 | 9,4 | 21,4 | 35,2 | 54,0 | 79,3 | 114,4 | 0,78 |
PO-P 25x100 | 25 | 100 | 91 | 47 | -- | 44 | 19 | 105 | 11,8 | 26,9 | 44,1 | 67,7 | 99,6 | 143,7 | 0,97 |
PO-P 35x60 | 35 | 60 | 123 | 63 | -- | 60 | 29 | 70 | 13,2 | 30,9 | 54,4 | 79,3 | 114,9 | 164,6 | 0,98 |
PO-P 35x80 | 35 | 80 | 123 | 63 | -- | 60 | 29 | 90 | 17,5 | 40,9 | 68,2 | 105,1 | 152,3 | 218,2 | 1,28 |
PO-P 35x100 | 35 | 100 | 123 | 63 | -- | 60 | 29 | 110 | 21,9 | 51,2 | 85,3 | 131,5 | 190,6 | 273,1 | 1,59 |
PO-P 35x120 | 35 | 120 | 123 | 63 | -- | 60 | 29 | 130 | 26,3 | 61,5 | 102,5 | 157,9 | 228,9 | 327,9 | 1,90 |
PO-P 45x80 | 45 | 80 | 152 | 82 | -- | 76 | 39 | 90 | 27,8 | 62,8 | 104,7 | 161 | 224 | 321,8 | 2,96 |
PO-P 45x110 | 45 | 110 | 152 | 82 | -- | 76 | 39 | 120 | 34,9 | 78,8 | 131,2 | 201,8 | 280,9 | 403 | 4,08 |
PO-P 45x150 | 45 | 150 | 152 | 82 | -- | 76 | 39 | 160 | 52,0 | 118,0 | 196,5 | 302,5 | 421,0 | 605,0 | 5,59 |
PO-P 50x120 | 50 | 120 | 160 | 86 | -- | 80 | 40 | 130 | 53,0 | 136,0 | 251,0 | 394,5 | 568,5 | 773,5 | 5,37 |
PO-P 50x160 | 50 | 160 | 160 | 88 | -- | 80 | 40 | 170 | 77,4 | 198,5 | 366,0 | 575,0 | 829,0 | 1128 | 7,35 |
PO-P 50x200 | 50 | 200 | 160 | 90 | -- | 80 | 40 | 210 | 101 | 260,5 | 479,0 | 750,0 | 1080 | 1465 | 9,45 |
Typical calculation of type PO-P
Type PO-P rubber oscillating elements are preferred as elastic drive units because the sum of their suspension values is approximately equal to nominal spring value. The bending angle of the oscillating elements should be within ±5°. The elastic oscillating elements should only be used with continuously loaded vibrated conveyors.
Type PO-P installation
Crank drive lever can be mounted to trough no.I or trough no.II to its end or any other point. The force direction should be perpendicular to fixation angle of PO-P oscillating element. The crank lever axis should be perpendicular to the fixation angle of the trough suspension element. Type PO-P oscillating elements should only be used in vibrated systems with natural frequency.